Mosaic Self-Adhesive Backsplash Tile Sheet

What this backsplash tile sheet is

This is a single sheet of mosaic pattern tile made from PET vinyl. The surface is waterproof, so splashes and everyday moisture wipe away with a damp cloth. A self-adhesive backing covers the whole sheet. Press it onto a smooth surface and it holds. When you want a change, peel it off without residue.

The mosaic pattern gives you the look of small tiles without grout, spacers or tools. Each sheet is 10 x 10 in (25.4 x 25.4 cm).

Sizes and coverage

Three sheets cover 2.1 sq ft (0.19 m2). For a typical kitchen backsplash, measure the width and height of the area, multiply them, then divide by 2.1 to find how many packs you need. Buy a little extra for cuts and edges.

Colors

Pick the tone that fits your room:

• Dark green
• Dark red
• Navy blue
• Cream
• Beige
• Light green
• Brown
• Light gray

Each option ships as a pack of 3 sheets. You can mix colors across packs if you want a border, a stripe or a two-tone layout.

Where it works

The adhesive grips smooth painted walls, tile and glass. Common spots include:

• Kitchen backsplash behind the counter
• Bathroom wall above a sink
• Rental kitchen or apartment updates
• Cabinet fronts and furniture faces
• Switch panels and small accent areas

Skip rough, textured, dusty or freshly painted surfaces. The sheet needs full contact to stay put. Clean the surface first, let it dry, then press the sheet down from one corner and smooth it as you go.

How to fit it

1. Measure the area and plan your sheet layout.
2. Wipe the surface clean and let it dry completely.
3. Peel the backing from one corner.
4. Line the sheet up with your starting edge.
5. Press it down and smooth outward to push out air.
6. Cut around outlets, corners and edges with scissors or a craft knife.
7. Overlap or butt sheets together for a continuous pattern.

If you need to reposition a sheet, lift it slowly and press it again. The adhesive is forgiving on smooth surfaces.

Care

Wipe clean with a damp cloth. For kitchen splashes, a little mild soap on the cloth helps. Avoid abrasive pads and harsh cleaners, which can dull the vinyl surface. The material is waterproof, so normal wiping will not harm it.

Removal

Peel the sheet off without residue. Start at a corner and pull slowly at a low angle. On painted walls, go gently so the paint stays intact. Any leftover tackiness wipes away with a damp cloth.

What to keep in mind

This is a decorative surface cover, not a structural tile. It sits on top of your existing wall or surface. It is not a substitute for real tile in wet areas that stay submerged. For a shower interior or a spot with constant standing water, use it above the splash zone only.

Order the color and pack count you need. Three sheets per pack, 2.1 sq ft (0.19 m2) of coverage, and a clean peel when you are ready for something new.