Foam Brick Wall Roll
Soft 3D brick and stone on a 27.6 x 78.7 in roll
From $25.95
Foam brick, stone and travertine
Peel and Stick Wall Panels for Feature Walls and Ceilings
10 products from $25.95, free shipping over $49. Arrives in 7-16 days. 30-day returns.
Self-adhesive foam and PVC panels that give a plain wall the face of brick, stone or travertine in an afternoon. Pick a roll for long runs with few joins, or square tiles for small areas and ceilings, and cut them to fit with a sharp utility knife.
Products
3D Foam Brick Wall Panels
Soft self-adhesive foam sheets with a raised brick pattern for smooth, flat, dry walls.
From $25.95
Wood Grain Peel and Stick Slat Wall Panels
Self-adhesive slat wall panels in six wood tones, one roll covers 12.9 sq ft (1.2 m2).
From $92.95
3D Foam Brick Wall Tiles
13.8 x 15 in self-adhesive foam tiles in packs of 10
From $28.95
Peel and Stick 3D Foam Wall Panels
Self-adhesive foam panels with an embossed brick pattern for smooth walls, tile and glass.
From $45.95
$46.95
White Foam Brick Panels, 20 Pack
Twenty 13.8 x 15 in white foam brick panels for a whole wall
$45.95
$46.95
Embossed Foam Brick Wall Panel
Self-adhesive embossed foam brick sheets for smooth painted walls, tile and glass.
From $29.95
Embossed Foam Ceiling Tiles
27.6 in square foam tiles with color accents, pack of 10
$37.95
$38.95
Soft 3D Wall Panel Roll
A flexible matte vinyl wall panel roll with a soft 3D texture, self-adhesive backing, and a waterproof finish.
From $33.95
Travertine Look Wall Roll
Flexible stone-texture PVC, 15.7 in x 9.8 ft per roll
$55.95
Showing 10 of 10
Rolls or tiles
The panels here come in two formats. Rolls run from ceiling to floor in long strips, so a wall has fewer joins and the pattern stays continuous. The foam brick roll is 27.6 in (70 cm) wide and 6.6 ft (2 m) long, and the travertine-look roll is 15.7 in (40 cm) wide and 9.8 ft (3 m) long.
Tiles come in packs. They suit small areas, awkward shapes and ceilings, where a long strip is hard to hold up, and one person can fit them alone. The foam brick tiles are 13.8 x 15 in (35 x 38 cm) in packs of 10 or 20, and the embossed ceiling tiles are 27.6 in (70 cm) square, so a pack of 10 covers a large area quickly.
Foam or flexible PVC
Foam panels have a soft, padded face with raised brick or stone relief you can feel. They are light, quick to cut and forgiving on walls with small dents, because the foam bridges minor flaws. A hard knock can leave a dent, so they suit bedrooms, living rooms and feature walls better than a busy hallway at bag height.
The travertine-look roll is a thinner, flexible PVC sheet with a fine stone texture. It reads flatter and more like real cladding, bends around gentle curves and wipes clean with a damp cloth.
Which look for which room
- Brick and stacked stone: a living room feature wall, the wall behind a TV, a headboard wall or a home office backdrop for video calls.
- Plain colors and soft prints: bedrooms and reading corners, where you want texture without a busy pattern.
- Embossed ceiling tiles: a plain or stained ceiling, or the top half of a wall above a rail.
- Travertine and gray stone: entry halls, dining areas and modern rooms that call for a calm, natural-stone look.
How much to order
Measure the width and height of each wall in inches, multiply them and divide by 144 to get square feet. Take off doors and windows, then add 10% for cuts and pattern matching. Every product page lists the coverage of one roll or pack, so divide your total by that figure and round up. A spare roll or a few extra tiles make later repairs easy, since a new batch can differ slightly in shade.
Before you fit
Panels stick best to smooth, clean, dry walls with paint that has cured for at least two weeks. Wipe away dust and grease, fill holes and let the wall dry. They do not hold well on textured plaster, old wallpaper, damp walls or flaking paint. In a rented home, test a small piece in a hidden spot first, because pulling off any adhesive panel can lift weak paint. Keep every panel away from showers, the wall behind a stove and direct heat.
For a step-by-step method, read our measure and make guide.
Delivery and returns
Orders ship with tracking and most arrive in 7 to 16 days. Returns are explained on our delivery and returns page.
| Panel | Format | Size | Covers | Finish |
|---|---|---|---|---|
| Roll | 27.6 x 78.7 in (70 x 200 cm) | 15.1 sq ft (1.4 m²) | Soft foam, brick and stone relief |
 | Pack of 10 | 13.8 x 15 in (35 x 38 cm) | 14.3 sq ft (1.33 m²) | Soft foam, brick, stone and marble |
 | Pack of 20 | 13.8 x 15 in (35 x 38 cm) | 28.6 sq ft (2.66 m²) | Soft foam, white brick |
 | Pack of 10 | 27.6 x 27.6 in (70 x 70 cm) | 52.7 sq ft (4.9 m²) | Carved foam with color accents |
 | Roll | 15.7 in x 9.8 ft (40 x 300 cm) | 12.9 sq ft (1.2 m²) | Flexible PVC, stone texture |
Questions
Do peel and stick wall panels damage the wall?
They can if the paint underneath is weak. The adhesive bonds to the paint, so on sound, well-cured paint most panels come away cleanly when you peel slowly at a low angle, while chalky or old paint can lift with them. Test a single panel in a hidden spot before you cover a whole wall, especially if you rent.
Can wall panels go in a bathroom or kitchen?
Away from direct water and heat, yes. A powder room wall or the far end of a kitchen works well. Keep panels out of showers, off the wall behind a stove and away from radiators, since steam and heat weaken the adhesive and can warp foam.
Which is easier to fit, a roll or tiles?
Tiles are easier for one person: each piece is small, light and quick to line up. Rolls cover faster with fewer joins, but a long strip goes up more easily with a helper, one person holding the roll and one pressing it to the wall.
Can I paint foam wall panels?
Many people do, with a water-based wall paint and a small foam roller. Try it on an offcut first. Spray paint and solvent-based paint can eat into foam, so avoid them.
How do I cut panels around outlets and switches?
Switch off the power at the breaker, take off the cover plate, press the panel over the box and cut the opening with a sharp utility knife. Screw the plate back on top so it holds the cut edge flat.