Peel and Stick Backsplash Tile Sheets

What this tile is

This is a single-piece tile sheet made of PVC with a self-adhesive backing. You peel the liner and press the sheet onto the wall. No grout, no mortar and no special tools. The surface wipes clean with a damp cloth, which suits kitchens and bathrooms where splashes happen.

Each sheet is thin and flexible, so it follows the flat surface it sits on. The look is a clean tile face rather than a raised or textured brick. That keeps the wall easy to wipe and the pattern easy to line up.

Size and coverage

One sheet is 11.56 x 8.38 in (29.36 x 21.3 cm). That is 0.67 sq ft (0.06 m2) of coverage per sheet. Measure your wall area first, then divide by 0.67 to see how many sheets you need. Add a little extra for cuts around outlets and corners.

Colors

Pick the color that fits your room. The options are Black, Pink, White, Dark green, White marble, Beige stone, Light gray, Teal, Green and Light blue. Solid colors give a calm, even wall. White marble and Beige stone bring a soft stone look. Dark green, Teal and Green work well behind open shelves. Light blue and Pink suit small spaces that need a lighter feel.

Where it can go

This tile is made for smooth painted walls, tile and glass. Those surfaces let the adhesive sit flat and hold. Clean the wall first, let it dry, then press the sheet down from one edge to the other. Smooth it with your hand or a soft cloth to push out air.

Rough, dusty, oily or peeling walls are not a good fit. Neither are walls with heavy texture. If your wall is painted, give the paint time to cure before you apply the sheet. On glass, the sheet works on a flat pane with no film or coating.

How to fit it

1. Measure the space and plan your layout. Mark where each sheet will sit.
2. Clean the surface with a damp cloth. Let it dry fully.
3. Peel the backing away a few inches at a time.
4. Press the sheet onto the wall, working from the top down.
5. Smooth out air bubbles with your hand or a soft cloth.
6. Trim the edges with scissors or a craft knife.

For a neat finish, line up the pattern or color edge before you press the full sheet down. If you need to lift a corner, do it slowly and keep the backing clean.

Care and removal

Wipe the surface with a damp cloth and a mild household cleaner. Avoid abrasive pads and strong solvents, which can dull the PVC face. The sheet is waterproof on the surface, so normal kitchen and bathroom splashes are fine.

To remove a sheet, warm the edge with a hair dryer on low, then peel it back slowly. Any sticky residue left behind can be wiped with a cloth and warm soapy water. The sheet is not meant to be reused once removed.