Daisy Print Foam Shelf Liner

What this liner is

This is a shelf and drawer liner made from EVA foam. It is waterproof, so a spill on a shelf or in a drawer stays on the surface instead of soaking through. There is no glue on the back. The liner rests in place on its own, and you can lift it out whenever you want to clean underneath it or move it to another spot.

The surface is white with a daisy print. The pattern is light and even, so it reads as a soft detail rather than a loud one. It suits kitchen cabinets, drawers, pantry shelves, bathroom vanities and fridge pads.

Sizes

Each roll is 78.7 in (200 cm) long. Pick the width that matches your shelf or drawer.

If your drawer is between two widths, choose the wider roll and trim the extra with household scissors. A straight cut along the edge keeps the liner looking neat.

Color and print

The liner comes in white with a daisy print. The white base keeps the inside of a cabinet bright, and the daisy print adds a small pattern that is easy to live with. Because the print is part of the foam surface, it does not peel or rub off during normal use.

How to fit it

1. Clear the shelf or drawer and wipe it dry.
2. Measure the inside of the drawer or shelf, front to back and side to side.
3. Unroll the liner and let it rest flat for a short time so it relaxes.
4. Cut the liner to size with scissors. A slight gap at the edges makes it easier to lift out later.
5. Lay it in place. No glue, tape or tools are needed.

To move it, lift a corner and pull it out. Because there is no adhesive, it comes away clean and can be reused in another drawer or on another shelf.

Where it works

• Kitchen drawers for cutlery, utensils and linens
• Cabinet shelves for dishes, pots and pantry items
• Bathroom vanity drawers and shelves
• Fridge pads and crisper drawer liners
• Desk drawers, craft drawers and storage bins

Care

Wipe the liner with a damp cloth. For a deeper clean, lift it out, rinse it and let it air dry before putting it back. The EVA foam is waterproof, so water will not damage it. Avoid harsh scrubbing that could dull the print.

What to expect

This is a non-adhesive liner, so it is not meant to grip like a glued or rubber-backed product. It stays in place through friction and its own weight, which is what makes it easy to remove and reuse. If you want a liner you can pull out, rinse and put back without leaving anything behind, this is the right kind of product.