Skip to content
Free delivery on orders $49+Step-by-step measuring guide30-day returns on unused, uncut items
GlassBlur

Peel and stick wallpaper

Marble Peel and Stick Wallpaper Roll

$29.95

Matte PVC vinyl wallpaper with a printed marble pattern and a self-adhesive backing. Press it onto smooth painted walls, tile or glass and wipe it clean with a damp cloth.

ColorWhite marble
How many rolls?Enter the size of your glass

Measure one pane of glass inside the frame. We add about 3/4 in on every edge for trimming. How to measure

Expected delivery Thu, Nov 5 to Tue, Nov 10

  • Free shipping over $49
  • 30-day returns
Shipping and returns

Free shipping over $49. Arrives in 7-12 days. Shipping times and costs per country

Not what you were looking for? Return it within 30 days of delivery. How returns work

Specifications

Material
Matte PVC vinyl
Sheet size
15.7 x 39.4 in (40 x 100 cm)
Fixing
Self-adhesive backing
Walls
Smooth painted walls, tile and glass
Care
Wipe with a damp cloth

What this marble wallpaper is

This is a self-adhesive vinyl wallpaper roll with a printed marble pattern and a matte finish. The material is matte PVC vinyl, so the surface stays soft rather than glossy. The back carries its own adhesive, which means you press it onto the wall and smooth it down. No paste, no mixing, no extra tools beyond a cloth and a squeegee or your hands.

It suits smooth painted walls, tile and glass. That covers a lot of the places people want a quick change: a kitchen backsplash, a bathroom wall, a rental kitchen, a laundry corner, the side of a cabinet, or a plain door. The marble print gives those surfaces a stone look without the weight or the work of real stone.

Sizes and colors

Every roll is 15.7 in (40 cm) wide. You choose the length when you order.

Size Best for
15.7 x 39.4 in (40 x 100 cm) A small patch, a shelf back, a sample of the pattern
15.7 x 196.9 in (40 x 500 cm) A single wall, a backsplash run, a cabinet front
15.7 x 393.7 in (40 x 1000 cm) A full wall, a long counter run, several small projects

Colors: White marble, Beige marble, Dark gray marble, Gray marble and White. The marble options carry the printed veining. The plain White option is a solid matte white for a clean, quiet surface.

How to fit it

Start with a smooth, clean, dry surface. Wipe the wall or tile down and let it dry fully. Dust and grease are the two things that make any self-adhesive roll lift at the edges.

Measure the height you need and cut the roll with a little extra at the top and bottom. Peel back a few inches of the backing at the top, line the roll up against your starting point, and press that strip down. Then work downward, peeling the backing away in short sections and smoothing as you go. A squeegee or a soft cloth pushes air out ahead of you. If a bubble shows up, lift that corner and lay it back down slowly.

For corners and edges, cut the roll rather than stretching it around the bend. Overlap seams by a small amount if you are covering a wide wall, and press the seam flat. On tile, the grout lines can show through as slight texture, which is normal for a thin vinyl roll.

Care

Wipe the surface with a damp cloth when it needs a clean. Skip abrasive pads and harsh cleaners, since they can dull the matte print. A mild soap and water mix on a soft cloth is enough for everyday marks.

Where it works best

Smooth painted walls, tile and glass are the surfaces this roll is made for. Textured walls, fresh paint that has not fully cured, and rough concrete are not good matches, because the adhesive needs full contact to hold. In a bathroom or kitchen, keep it away from spots that sit in standing water. It handles normal splashes and steam fine when the edges are pressed down well.

If you are covering a large wall, order all your rolls at the same time so the pattern and color come from the same run. Measure your wall first, then add a little extra for trimming. For a first project, the 15.7 x 39.4 in (40 x 100 cm) roll is an easy way to test the look on your own wall before you commit to a full length.

Questions

Will this stick to tile in a bathroom or kitchen?

Yes. The self-adhesive backing is made for smooth painted walls, tile and glass. Clean the tile first and press the edges down well so steam and splashes do not lift them.

Can I remove it later without damage?

Pull slowly at a low angle and the adhesive comes away with the roll. On smooth, fully cured surfaces it leaves the wall in good shape.

How much wall does one roll cover?

Each roll is 15.7 in (40 cm) wide. The 15.7 x 39.4 in (40 x 100 cm) size covers a small patch, the 15.7 x 196.9 in (40 x 500 cm) size covers a single wall or backsplash run, and the 15.7 x 393.7 in (40 x 1000 cm) size covers a full wall.

Do I need paste or glue to put it up?

No. The roll has a self-adhesive backing, so you peel the liner and press it onto the surface. You only need a clean wall, a cloth and something to smooth the paper down.

GlassBlur

Shop by category

Your bag

Favorites